Build A Baby Turtle - Starter Set

Build-A-Baby Turtle! Now you can create your own baby turtle with a single-color printer!
Two sets of eyes are painted for those who have a multicolor printer as well.

These make really fun purge items for multicolor prints, also.

Please read the printing recommendations.

DO NOT DOWNSIZE - It is as small as it can be, or the t connector pieces will fuse.

If you have elephant foot issues, you may need to adjust. I would print the shell or an eye to test.

Painted 3mf is included. settings; what works for me may not necessarily be the correct setting for your printer. flushing volumes. Make sure to start a new project.

You may need s under the eye sockets if you make XL plate size baby turtle bases.

Assembly:
Everything pops on -The eyes must be glued to ensure they are permanently placed.

There is a slight curve on the front of the turtle's shell. It shouldn't take too much force to pop on, but different filaments expand differently.

Cloud assembly:
Please look at the picture for reference. As you are looking at the turtle, the star on the right slot opens to the front, and the star on the left slot opens to the back. They get slightly turned to pop in place.

Printing recommendations:
Slow down the initial layer speeds to 20 - (Shown in picture)
Reduce Acceleration - (See picture) Slower acceleration = smoother looking prints
.20 layer height
Print in place, no required
3 walls - 15% infill
Allow the plate to cool before removing the prints.
Reduce acceleration and adjust overhang speeds as needed

Filaments:
Polymaker Polychroma - Matte PLA Rainbow
Polymaker PLA- Cold White
Protopasta - Always Sunny
Protopasta - Moonstruck White
Protopasta - Empire Strikes Black P
Protopasta - Nebula Rainbow
Protopasta - Golddust Transluscent
Protopasta - Lukes Proton Purple

Important Please Read:
All Rebel Alicorn Designs are protected under Copyright Law. With your purchase, you are given the right to and print the design for your personal use only. You do NOT have permission to resell, remix, or redistribute the digital files in any way. No alterations to the designs are permitted. Prints of the designs cannot be sold without permission. To sell the PRINTS of Rebel Alicorn Designs, you must obtain authorization by ing the “Legacy Merchant Tier or Merchant Tier” on Patreon, Thangs, or MMF.

More designs are coming soon! Check out my socials and give me a follow to keep up to date.

Warning:
NOT suitable for unsupervised play by children or pets. Small parts can become a choking hazard if broken off due to rough play and broken 3D printed parts can create sharp edges. NOT recommended for children under 3.

See description for printing recommendations.