N-scale bus stop system, version 3.0

Version 3.0 of the previous 2.0 bus stops. The big difference with the latter is that this is a complete system. Each bus stop has seats, base, structure and roof, as well as a pavement as a potted base to place vegetation. The scale is 1:150 which makes it suitable for electric train models in N scale. It consists of several STL files.

Model features:

This is the 3.0 version of the model of the "N scale stops version 2.0". The previous version is not removed and therefore, they are included in the file pack. The following is included in this new version:

• All STL files are sorted into categories.

• Each STL file comes with the specified number of times to be printed to generate the default models. However, each element can be printed as many times as needed or desired.

• 3 whereabouts models are created: large, medium and small. In addition, two kinds of design are added to choose from.

• 3 models of whereabouts base are created: large (length 25 cms), medium (length 8.2 cms) and small (length 6.8 cms). In addition, two different widths are added to choose from (2.25 and 2.98 cms respectively).

• A fourth model of the base of the whereabouts is created, which allows to modulate it in the desired length, from base modules: the two edges (length 7 mm) and the central module (length 6.8 mms), with the two widths of your choice. If you want to modulate, you must print the central module as many times as you need.

• New structures are created for the central bus stop system: a small central bus stop or a bus stop with security booth, each with 2 designs of your choice. In the case of the structure of these, it can be printed with or without s as it comes the complete structure and also separated by plates.

• All stands can be printed without s. Print in the best possible quality to appreciate the details.

• Easy to assemble as it is only necessary to look at the renderings. In addition, sheets with parts guide and PSD file for printing large whereabouts ads are included.

• Recommended colors: structure in beige or white, chairs in red or brown, base in gray, roof in green, door in brown, windows in white and planter in brown. Ads in green and black.

Optimized for printers of any type (except for the long base which is printed on printers with a base of at least 30x30 cms).

While the holes are designed for the correct insertion of windows and doors equally the highest quality should be used to print the latter, and it may be necessary to sand or grind the holes if necessary.

Glue should be used to attach the elements, preferably UHU.

Extrusion temperature: 195-200º.

Material: Any, but preferably PLA

Bedding temperature: 55-60º

Does it require : No, only on bases.