Skip to content

POULAINS LIGHTHOUSE - N (1/160) SCALE MODEL LANDMARK

Phare-des-Poulains-1.png POULAINS LIGHTHOUSE - N (1/160) SCALE MODEL LANDMARK
Phare-des-Poulains-2.png POULAINS LIGHTHOUSE - N (1/160) SCALE MODEL LANDMARK
Phare-des-Poulains-3.png POULAINS LIGHTHOUSE - N (1/160) SCALE MODEL LANDMARK
Phare-des-Poulains-4.png POULAINS LIGHTHOUSE - N (1/160) SCALE MODEL LANDMARK
Phare-des-Poulains-5.png POULAINS LIGHTHOUSE - N (1/160) SCALE MODEL LANDMARK
Phare-des-Poulains-6.png POULAINS LIGHTHOUSE - N (1/160) SCALE MODEL LANDMARK
Phare-des-Poulains-7.png POULAINS LIGHTHOUSE - N (1/160) SCALE MODEL LANDMARK
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (1 vote)
Evaluation of on the printability, utility, level of detail, etc.
License
3D design format
1 file (ZIP) Close
  • 160020 PHARE DES POULAINS.zip
    • 160020 PHARE DES POULAINS 1'160 roof&shutters template.svg
    • 160020 PHARE DES POULAINS INSTRUCTIONS.pdf
    • 160020 PHARE DES POULAINS STL files/G1 HOUSE.stl
    • 160020 PHARE DES POULAINS STL files/G10 WINDOW_C x1.stl
    • 160020 PHARE DES POULAINS STL files/G11 WINDOW_D x3.stl
    • 160020 PHARE DES POULAINS STL files/G12 BACKYARD.stl
    • 160020 PHARE DES POULAINS STL files/G13 BACKYARD.stl
    • 160020 PHARE DES POULAINS STL files/G14 CHIMMEY.stl
    • 160020 PHARE DES POULAINS STL files/G2 TOWER.stl
    • 160020 PHARE DES POULAINS STL files/G3 WATCHROOM.stl
    • 160020 PHARE DES POULAINS STL files/G4 LAMP .stl
    • 160020 PHARE DES POULAINS STL files/G5 DOME.stl
    • 160020 PHARE DES POULAINS STL files/G6 DOOR_A x2.stl
    • 160020 PHARE DES POULAINS STL files/G7 DOOR_B x1.stl
    • 160020 PHARE DES POULAINS STL files/G8 WINDOW_A x3.stl
    • 160020 PHARE DES POULAINS STL files/G9 WINDOW_B x1.stl
    • 160020 PHARE DES POULAINS STL files/T1 LAMP.stl
    • 160020 PHARE DES POULAINS STL files (with s)/G1 HOUSE ed.stl
    • 160020 PHARE DES POULAINS STL files (with s)/G10 WINDOW_C x1 ed.stl
    • 160020 PHARE DES POULAINS STL files (with s)/G11 WINDOW_D x3 ed.stl
    • 160020 PHARE DES POULAINS STL files (with s)/G12 BACKYARD ed.stl
    • 160020 PHARE DES POULAINS STL files (with s)/G13 BACKYARD ed.stl
    • 160020 PHARE DES POULAINS STL files (with s)/G14 CHIMMEY ed.stl
    • 160020 PHARE DES POULAINS STL files (with s)/G2 TOWER ed.stl
    • 160020 PHARE DES POULAINS STL files (with s)/G3 WATCHROOM ed.stl
    • 160020 PHARE DES POULAINS STL files (with s)/G4 LAMP ed.stl
    • 160020 PHARE DES POULAINS STL files (with s)/G5 DOME ed.stl
    • 160020 PHARE DES POULAINS STL files (with s)/G6 DOOR_A x2 ed.stl
    • 160020 PHARE DES POULAINS STL files (with s)/G7 DOOR_B x1 ed.stl
    • 160020 PHARE DES POULAINS STL files (with s)/G8 WINDOW_A x3 ed.stl
    • 160020 PHARE DES POULAINS STL files (with s)/G9 WINDOW_B x1 ed.stl
    • 160020 PHARE DES POULAINS STL files (with s)/T1 LAMP ed.stl
    • 160020 PHARE DES POULAINS (full view not for printing).stl

Learn more about the formats
Publication date 2023-03-05 at 17:22
Design number 1099815
Arqscalemodeller

Arqscalemodeller

Certified
Issue with this design? Report a problem.

3D printer file info

3D model description

The Poulains lighthouse, Phare des Poulains is located on the northwestern tip of Belle-Île-en-Mer, the largest island in Brittany and heart of one of the most dramatic ocean landscapes in .

Built in 1868 according to the lighthouse house plan defined by the engineer Léonce Reynaud, the lighthouse is small but functional, with no comforts except for a courtyard protected from the wind by a low wall.
Equipped with a 4th order light, flashes a white light every 5 seconds with a range of 24 nautical miles.

Visit Belle-Île-en-Mer

The model was designed using pictures and detailed drawing of the actual building in scale 1/160 (N scale).

You can resize it using your favourite software before print, however, if you do so, some of the parts may lose stability or look over scaled.

Model has 15 different pieces that you need to assembly as any other model kit: I attached an instruction booklet together with the ed files. Printing, painting and weathering will give a lot of fun.

Please note that the kit doesn't include the roof: This is to be done with styrene or cardboard 1mm thick.
I included a template in the instructions booklet together with SVG file in case you have acces to a laser cutter.

This model can be a great addition to your layout or diorama.

Happy modelling!

3D printing settings

  • Designed to be printed using SLA
  • L109,8 X W64,6 X H98 (mm)
  • The widest part measure 49,6x64,6 mm: Check your 3dprinter build volume
  • The kit has 15 parts: With the you get both with and without s.
  • Roof is not provided. I consider easier to get better results using styrene sheet or cardboard to build it: A template (and SVG file for those who have laser cutter) is provided. To texture it I used in my model roof slates texture from Redutex brand: code 160PC111
  • The ed files are not with the optimal printing orientation but with the optimal orientation according to minimize sanding and provided a perfect fit between parts. However, you can add s according to your methods.
  • The kit part T1 LAMP correspond to the lamp and has to be printed in clear resin.
  • The kit has been designed to allow space for wiring in case you want to lighten with micro LEDs

My printing parameters:
-ANYCUBIC PHOTON MONO X
-Resin ELEGOO standard grey
-Layer height 0.050
-Exposure 1.9 s
-Bottom layer count 6 /25s

Happy modelling!

Categories

Famous monuments

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi 💜.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.