We usually create practical designs, but we thought we'd mix it up a bit with an 'impractical' project that we've really enjoyed creating. If you like your doughnuts to be over-engineered, then this design is for you!
Created purely for fun, this design is not highly performant. However, if you love doughnuts, you'll hopefully appreciate the customizability of this doughnut design.
This design can be printed on a single-extruder 3D printer, but it also s part splitting for multi-color printing on single-extruder or multi-extruder printers.
This design is completely free and shared under a permissive license. Your is hugely appreciated.
Did you know?
Some of our designs cannot be found on Thingiverse. If you are looking for more, check out our projects:
https://codeandmake.com/
OpenSCAD Customizer Options
We recommend you use OpenSCAD to customize this design.
This design has the following Customizer options:
General
Part
- Which part(s) should be included in the render?
Flatten_Bottom_Percent
- How much to flatten the bottom
Doughnut
Doughnut_Inner_Diameter
- Inside diameter of the doughnut
Doughnut_Outer_Diameter
- Outside diameter of the doughnut
Icing
Add_Icing
- Add icing to the doughnut
Icing_Thickness
- The thickness of the icing
Icing_Swoops
- The number of swoops in the icing
Icing_Drippiness
- The drippiness of the icing
Sprinkles
Add_Sprinkles
- Add sprinkles to the doughnut
Sprinkle_Type
- The type of sprinkles
Sprinkle_Distribution
- How to place the sprinkles
Sprinkle_Diameter
- The diameter of the sprinkles
Sprinkle_Length
- The length of the sprinkles (Long Sprinkles only)
Number_of_Sprinkles
- The number of the sprinkles
Teeth
Mouth_Width
- The base width of the mouth
Number_of_Teeth
- The number of teeth in the mouth
Teeth_Shape_Ratio
- How flat or round the teeth should be
Teeth_Smoothing
- The amount of smoothing applied to the teeth
Teeth_Bite_Percent
- The amount of bite as percentage of mouth radius
Teeth_Position_Rotation
- The position of the teeth
Preview
Show_Unselected_Parts_In_Preview
- Whether to show unselected parts in preview mode
Show_Teeth_In_Preview
- Whether to show the teeth in preview mode
Design and Performance Considerations
To improve performance, previews are generated with a low polygon count. Your exported design (STL) will have a higher polygon count and may take several minutes to render, depending on your system specification and chosen customizer options.
The default samples may not be easily printable without a raft and/or s, however, we've provided a number of customizer options that will help you minimize the need for rafts or s. In particular you can use the Flatten_Bottom_Percent
option, but you can also adjust settings such as Icing_Thickness
to reduce the need for s.
If you'd like a multi-coloured print but you do not have a multi-extruder 3D printer, consider printing the 'Doughnut' part and 'Icing' (or 'Icing with Sprinkles') separately and ing them with a few spots of glue.
Material
This design is perfect for printing in many filaments, including PLA, PETG and ABS.
Versions
- 1.0 (8 Apr 2022) - Initial version
Printing
Recommended slicer settings:
- Resolution: 0.1mm - 0.2mm
- Infill: ~20% or higher if you need extra durability.
- s: Probably for most designs.
- Rafts: Not required, unless you use a low
Flatten_Bottom_Percent
value or experience adhesion issues.
License
The "Bitten Doughnut" models (.stl) are licensed under the CC BY license by Code and Make.
The "Bitten Doughnut" code (.scad) is licensed under The MIT License by Code and Make.
Note: 'BSD' license has been selected as it is the closest available option in the list.
We are proud to offer content to you absolutely free.
We love to create free content for you. As you might imagine, it takes a lot of time. ers help us fund materials and equipment to create future projects and tutorials. To show your appreciation, please use the link below:
https://codeandmake.com/
We thank you so much for your !