SCT 1/32 Scale Short Course Scale de C&K RC

SCT 1/32 Scale Short Course Scale from C&K RC

https://docs.google.com/spreadsheets/d/1hAU5QYG21nMo7jNO8TuOrbYL7LKikzfXd2LJS884-3s/edit?usp=sharing

https://docs.google.com/presentation/d/1j6b7fiozMRbZLf0oKdCEPzPrpJJ9A9kIiKf_TUzaeMw/edit?usp=sharing

A Buggy version is coming soon, stay tuned

This is the Micro that will fill the long ago created void from the departure of the 1/24 scale Losi SCT . Perfect dimensions for the R track, with a narrower width than the Losi 1/24 SCT, the Losi Micro B, the Kyosho 1/24 Buggy, and the Associated 1/28, this is the set-up that the Micro World of RC has been missing. With available optional rims that can be paired with Kyosho Buggy tires, this machine will please both on and off the R track.

This machine uses the body from the Orlando Hunter trophy truck to keep the width to a minimum, creating the 1/32 scale while accomplishing the handling of an 1/8 Scale.

Printing instructions
4 mm nozzle works fine, 2 mm if you prefer
Layer height, lower is better, especially for smaller parts
3 or 4 wall loops
4 to 6 top layers
25 to 40 infill
Brim for small parts only if needed to print on your printer
All parts should print without , you can use s for motor mount to get cleaner bearing bores
Printer used to develop parts was Bambu P1S with 4 mm nozzle, be sure to run some test parts and calibrate as needed to get the correct hole sizes for screws & bearing bores
PLA used for prototyping, but please experiment